Tanco 1400 Autowrap, Operator'S Handbook Manual, Page: 61 / 132

Tanco Autowrap - 1400
Operator’s Manual
60
- Check if the arm is attempting to drive but is under pressure, unscrew adjustment on Valve 16 - Brake
Valve on Tower Block. If this does not solve problem return valve to original position.
-Check if the hydraulics are under pressure and the arm is not moving then there may be a problem with
the electrical supply to the control valve, this is best dealt with by an experienced technician.
The Hand Controller will not Operate the Lift Arm
In the Operator Setup, the Remote Type (Menu no.4.41) may be set to RF, if so, change to IR.
Please contact your dealer if you are in any doubt regarding the above.
10. Troubleshooting