Tanco 1400 Autowrap, Operator'S Handbook Manual, Page: 18 / 132

Tanco Autowrap - 1400
Operator’s Manual
17
Hydraulic Connection
The hydraulic hoses between machine and tractor are equipped with 1/2” ISO Male Quick-Couplers.
Ensure the oil pressure has been discharged before you connect the oil hoses using the tractor’s
hydraulic lever.
To make sure that the bale wrapper works properly, the tractors’ oil pressure has to be at least 180 bar.
The oil flow should be 15 - 25 liters per minute. The return pressure on the return must be as low as
possible, and not exceed 10 bar. This should be measured with a gauge. It is recommended to use one
single-working hydraulic outlet and arrange a free return circuit to the oil tank.
If you are unsure of what oil pressure the tractor gives, or what oil pressure the bale wrapper receives,
please contact your machinery dealer. Generally all tractors have got some counter-pressure in their
hydraulic return systems. Some tractors have more than others.
Note:
The Hose with the Red Cap shall be connected to pressure ‘P’ and Hose with Blue Cap to the return ‘T’.
6. Machine Setup