U
SING
Y
OUR
P
RINTER
ON
A
N
ETWORK
D.
9
D
11
Press the
Enter
button (
) to access the IP Address
menu.
IP address consists of 4 bytes.
12
Press the scroll button (
or
) to enter a number
between 0 and 255 and press the
Enter
button (
).
13
Repeat Step 12 to complete the address from the 1st byte
to the 4th byte.
14
To select other parameters, such as Subnet Mask or
Gateway, press the
Upper Level
button (
), then use the
scroll button (
or
). Press the
Enter
button (
).
15
Repeat steps 12 and 13 to configure the other TCP/IP
parameters.
16
Press the
ON Line/Continue
button (
) to return to
ready mode.
Dynamic Addressing (BOOTP/DHCP)
To assign the TCP/IP address automatically by the server, take
the following steps:
1
In ready mode press the
Menu
button (
) until you see
“Network” on the bottom line of the display. Press the
Enter
button (
) to access the menu.
2
Press the
Enter
button (
) when “Config Network”
displays on the bottom line.
3
Press the scroll button (
or
) to display “Yes” and
press the
Enter
button (
).
4
press the
Upper Level
button (
), then use the scroll
button (
).
5
Press the
Enter
button (
) when “Config TCP” displays.
Enter a number between 0
and 255 for each byte.
Summary of Contents for 9025
