manualshive.com logo in svg

TallyGenicom 2248, User Manual

Share
Download
TallyGenicom 2248 User Manual Download Page 50

PAPER HANDLING

User's Manual

3-4

ADJUSTING FOR PAPER
THICKNESS

The printer can handle paper of different thicknesses, including multipart

forms with up to five parts (original plus four copies).  For details on paper

thickness specifications, see Appendix B.

The paper thickness lever, located at the top right corner of the printer, allows

you to adjust for different paper thicknesses.  Be sure to adjust the paper

thickness lever whenever you change the number of copies being printed.

The paper thickness lever has nine settings:  1 to 5 and A to D.  Use Table 3.2

to determine the appropriate setting for your paper; then, move the paper

thickness lever to the appropriate position.

Adjusting the paper thickness lever

Paper thickness lever

Move to D.

Summary of Contents for 2248

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands