TallyGenicom 2248 User Manual Download

Page: 17 / 240

1-1

INTRODUCTION

User's Manual

Quick

Reference

Introduction

Setting Up

Paper

Handling

Printing

Setup Mode

INTRODUCTION

Congratulations on purchasing this printer

. This

printer is a compact, versatile printer that offers

maximum compatibility with today’s software

packages and personal computers.

The 24-wire print head provides crisp, clear printing for business, office, and

home environments. This printer is also easy to install and use.

Dot matrix printer

Key printer features and options are listed in the next two sections.

•

Software compatibility

. This printer operates with the IBM Proprinter

XL24E command set and the Epson ESC/P2 command set.

•

Various character sets.

As basic character sets, IBM PC character sets 1

and 2 are available for the IBM Proprinter XL24E emulation, and the italic

character set and graphics character sets 1 and 2 are available for the Epson

ESC/P2 emulation. As national character sets, a total of 57 or 61 national

character sets (depending on the emulation), including IBM PS/2 character

sets, are available.

FEATURES

Summary of Contents for 2248

















































































































































































































































Search results

Summary of Contents for 2248

Reviews:

Related manuals for 2248

Brands by name

Popular brands

TallyGenicom 2248, User Manual

Search results

Summary of Contents for 2248

Reviews:

Related manuals for 2248

Brands by name

Popular brands