Tally PCX-PF4110EC User Manual Download Page 73

Page: 73 / 192

Chapter 6 Maintaining Your Printer

2. Pull and unlock the lever.
3. Open the top cover fully.
4. Turn the two green lock levers to

unlock the used fuser cleaning roller.

5. Lift the fuser cleaning roller out of the

printer.

6. Discard the used fuser cleaning roller as

indicated in “Disposing of Supplies” on

page 71.

7. Insert the new fuser cleaning roller.
8. Turn the two green lock levers to lock

the new fuser cleaning roller in place.

9. Close the top cover carefully until it

locks.

Note:

Set the fuser cleaning roller counter to zero after initial installation

and replacement. For more information, see “Setting the Fuser Cleaning Roller

Counter to Zero” on page 16.

Summary of Contents for PCX-PF4110EC

































































































































































































Search results

Summary of Contents for PCX-PF4110EC

Reviews:

Related manuals for PCX-PF4110EC

Brands by name

Popular brands

Tally PCX-PF4110EC, User Manual

Search results

Summary of Contents for PCX-PF4110EC

Reviews:

Related manuals for PCX-PF4110EC

Brands by name

Popular brands