Tally PCX-PF4110EC User Manual Download Page 128

Page: 128 / 192

Tally T8006/T8306 Color Laser Printer User Guide

122

Test Menu

The Test Menu allows you to print the test pattern, current menu settings,

and printer information.

TestPrint

TestPrint is a built-in feature that allows you to check printer operations.

To print a TestPrint:

Tray2: A3

Ready

1. Check that “Ready” appears on the

display and the DATA light is off.

Tray2: A3

Not Ready

2. Press

ONLINE

to go offline.

Tray1: A4

Not Ready

3. Press

TRAY

, and select a tray as the

paper feed source for the test print.

Tray1: A4

Test Menu

4. Press the

MENU

key.

Tray1: A4

Test Menu

5. Press the key to enter Test Menu.

Tray1: A4

TestPrint

6. Press the

key twice to begin print-

ing.

Tray1: A4

Not Ready

7. When the test print is complete, press

the

ONLINE

key to return to nor-

mal operations.

Summary of Contents for PCX-PF4110EC

































































































































































































Search results

Summary of Contents for PCX-PF4110EC

Reviews:

Related manuals for PCX-PF4110EC

Brands by name

Popular brands

Tally PCX-PF4110EC, User Manual

Search results

Summary of Contents for PCX-PF4110EC

Reviews:

Related manuals for PCX-PF4110EC

Brands by name

Popular brands