Tally PCX-PF4110EC User Manual Download Page 46

Page: 46 / 192

Tally T8006/T8306 Color Laser Printers User Guide

Installing The Envelope Feeder (T8306 Only)

Note:

The T8006 printer does not need an envelope feeder. The T8006

paper tray can be adjusted to handle envelopes.

The envelope feeder will only work in Tray 1.

6. Put the paper tray into the

printer.

7. Confirm that the display shows

the correct paper size. If

---

appears on the display as the

paper size, reinstall the paper,

making sure the paper fits

securely in the tray.

1. Adjust the lateral and end

retainers in the paper tray to

the full open position.

2. Hook the envelope feeder on

the tray base.

3. Adjust the lateral and end

retainers to secure the enve-

lope feeder.

Summary of Contents for PCX-PF4110EC

































































































































































































Search results

Summary of Contents for PCX-PF4110EC

Reviews:

Related manuals for PCX-PF4110EC

Brands by name

Popular brands

Tally PCX-PF4110EC, User Manual

Search results

Summary of Contents for PCX-PF4110EC

Reviews:

Related manuals for PCX-PF4110EC

Brands by name

Popular brands