Tally PCX-PF4110EC User Manual Download Page 148

Page: 148 / 192

Tally T8006/T8306 Color Laser Printer User Guide

142

Close Front Cover

The front cover is not fully closed.

Close PFU Cover

The paper feeder unit cover is not fully

closed.

Close Top Cover

The top cover is not fully closed.

Data Error

Invalid print data received by the printer.

EEPROM Error

A temporary error occurred. Check the

print job and continue printing.

Jam3 Upper, Rear

A paper jam has occurred in the indi-

cated place.

Not Ready

The printer is not ready to receive print

data.

Output Tray Full

The output tray is full.

PLEASE WAIT (06)

Printer is running initial diagnostics.

READY

The printer is ready to receive print data.

Summary of Contents for PCX-PF4110EC

































































































































































































Search results

Summary of Contents for PCX-PF4110EC

Reviews:

Related manuals for PCX-PF4110EC

Brands by name

Popular brands

Tally PCX-PF4110EC, User Manual

Search results

Summary of Contents for PCX-PF4110EC

Reviews:

Related manuals for PCX-PF4110EC

Brands by name

Popular brands