Tally PCX-PF4110EC User Manual Download Page 26

Page: 26 / 192

Tally T8006/T8306 Color Laser Printers User Guide

Installing the Power Cord

Warning!

Use properly grounded wall sockets. Do not use converter plugs.

Starting the Printer

After you install the Starter Kit and plug in the printer, load paper into the

paper tray, turn on the printer, and print a test page.

Loading Paper for Test Printing

1. Plug the printer power cord into

the printer.

2. Plug the printer power cord into

a power source with surge pro-

tection.

1. Remove the paper tray from the

printer by gently lifting both

sides of the tray while pulling

outward.

2. Remove the tray cover (T8306

only).

Summary of Contents for PCX-PF4110EC

































































































































































































Search results

Summary of Contents for PCX-PF4110EC

Reviews:

Related manuals for PCX-PF4110EC

Brands by name

Popular brands

Tally PCX-PF4110EC, User Manual

Search results

Summary of Contents for PCX-PF4110EC

Reviews:

Related manuals for PCX-PF4110EC

Brands by name

Popular brands