Tally PCX-PF4110EC, User Manual

Page: 171 / 192

Appendix E Network Management
165
For example, some PostScript drivers do not suffix the code (0x04),
indicating the end of a job, to the print job. In this case, edit the following
entry:
Replacing Character Strings
Replacement of up to 20 sets of character strings can be specified for each
logical printer.
All character strings must be entered as hexadecimal numeric characters.
The count byte must be placed before a retrieval character string and
before a replacement character string.
For example, edit the following parameter in the config file to replace a
UNIX line feed (0x0A) with a DOS line feed (0x0D 0x0A) for logical
printer 1:
This is the default setting for logical printers 5 to 8.
Conversion from ASCII to PostScript
To set PostScript conversion, you must turn on postscript filtering in the
printer configuration file and set the page size, direction, format, and the
font to be used.
The default size is A4 and default orientation is portrait.
To change these settings, use these parameters:
PR1_AFT.:04
PRI_AFT.:04
PR1_STR. : 01 0A 02 0D 0A
01
Count byte of the retrieval character string (length of the
retrieval character string)
0A
Retrieval character string
02
Count byte of the replacement character string (length of the
replacement character string)
0D0A
Replacement character string
Page Format Default
Value
Meaning
Number of lines per page
(LPP)
66
Number of characters per
line (CPL)
0 0 = Turn of a line invalid