2 8
T A L K S W I T C H I N S TA LL A T I O N
INCREASING MEMORY CAPACITY
The recording time for internal music on hold, voicemail, and the auto
attendants is two hours per TalkSwitch unit. You can expand the built-in
memory using memory cards. Contact your reseller to purchase memory
upgrades.
TalkSwitch memory cards
TalkSwitch memory cards are specifically formatted for use with TalkSwitch
units. They allow you to add additional voicemail message capacity to your
unit. Voicemail memory is used to store messages left in voice mailboxes. It
is also used to store auto attendant greetings and announcements.
Figure 17: Memory card
Installing a memory card
1. Insert the memory card into the memory slot with the gold contact face
down and the “This side up” label showing. You don’t have to turn the
unit off or disconnect any of the telephones.
2. Ensure the
Total Unit Time
has increased in the
Mailbox Data
window.
Music on
Hold
You can add music on hold to your system by loading an
internal music file. The music file is copied to each TalkSwitch
unit, so the music on hold will be the same for each line of
each unit.
Public
Address (PA)
Each unit has a PA output for connection to a public address
system. The PA output for a TalkSwitch unit is only accessible
from extensions connected to that unit. To connect all outputs
to a single amplifier, you will require an adapter.