T A L K S W I T C H U S E R G U I D E
9 7
f) Repeat Steps d and e until all required holidays are listed.
g) Select the mode to
Use for Call Cascade settings
. Choices are
Mode 1
and
Mode 2
. This setting determines whether an incoming call will
use the extension’s Mode 1 or Mode 2 call cascade during Holiday
Mode.
Changing the date and time
The
Call Handling > Modes
page shows the current date and time in the
TalkSwitch unit. You can change the date and time to match the computer.
1. Click
Adjust...
. The
Adjust Date/Time
window appears, and shows the
current date and time in the computer.
Alternatively, you can click the
Adjust Date/Time
link in the
About
TalkSwitch
page.
2. Set the
Time
in the computer.
3. Select the
Date
in the computer.
4. Select the
Time Zone
in the computer.
5. Select the
Automatically adjust TalkSwitch clock for daylight saving
changes
check box if your region uses Daylight Savings Time.
6. If required, enter a different
NTP Server
. The NTP Server provides the date
and time to the IP extensions.
7. Click
Set
. The date and time in the TalkSwitch unit is changed to match
the computer. You do not have to save the configuration for the change
to take effect.