ETP-500
Series Analog Call Station
Installation & Operation Manual
Page
10
of
23
Rev. 3/16/2017
Copyright 2017 Talkaphone
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, Scream Alert, WEBS and WEBS Contact are registered trademarks of Talkaphone All rights reserved.
Code Summary (for keypad models, see p.14)
Command
Function
6
Turn on Auxiliary Output 1 for 1 second
*3* …[up to 8 digits]*
Master Access Code entry to change Guard Access Code or Master
Access Code (
Default Code is *3*12345678*)
*4* …[up to 8 digits]*
Guard Access Code entry for phone programming
(Default Code is *4**)
*5*
Turns on unit speaker & microphone when you call in to the unit
Effective for that call only
*9*
Elicit phone ID number
*10* …[up to 8 digits]*
Programs and stores a new Master Access Code
*11* …[up to 8 digits]*
Programs and stores a new Guard Access Code
*12* …[
6 digits]*
Program phone Identification number
*13* …[up to 18 digits]*
Programs the primary number called by Button #1
*14*[1, 2, or 3]*
Configures phone MODE
(1 is default)
*17* …[minutes]*
Sets conversation timer (1
–
4,320 minutes) (
default is 12
minutes)
*18* …
[ring cycles]*
Sets number of ring cycles (3
–
9) before phone aborts call and
either redials the primary phone number or switches to the
secondary phone number
(default is 9 ring cycles)
*19*
Makes call progress tones audible
(default) [
Mode 1]
*20*
Makes call progress tones silent [Mode 1]
*21*
Configures phone for use with a Rolm PBX or a Mitel PBX
*22*
Cancels *21* command
(default)
*23* …[up to 18 digits]*
Programs the secondary number called by Button #1
*24* …[0 –
6]*
Sets "ON" time for Auxiliary Output #1 (incoming calls only)
*25*
Turn ON Auxiliary Output #1, effective for that call only
*26*
Turn OFF Auxiliary Output #1, effective for that call only
*27* …[0 –
6]*
Sets "ON" time for Auxiliary Output #2 (incoming calls only)
*28*
Turn ON Auxiliary Output #2, effective for that call only
*29*
Turn OFF Auxiliary Output #2, effective for that call only
*40* …[0 –
10]*
Sets delay before phone dials (0
–
10 seconds)
May be used to wait to obtain PBX dial tone
(default is 2 seconds)
*49*
Suppress automatic transmission of the phone ID number
(default)
*50*
Automatically transmit phone ID
when guard station answers call
*53*
Sets phone to disconnect if the Guard Station is silent 60 seconds
*54*
Phone will not disconnect if Guard Station is silent
(default)
*55*
Sets phone to disconnect if the Guard Station is silent 30 seconds
*56*
Sets Button #1 to activate Output #2 when pushed
*57*
Cancels *56* command
(default)
*58*
Record your identification message
*59*
Playback the recorded identification message
*64*
Make Auxiliary Output #1 drive an additional LED
*65*
Cancels *64* command
(default)
*70*
Disable automatic playback of the recorded message when a call is
answered, but
do not delete the message
