TP350 User’s Manual
（２）
General Precautions Regarding TaKaRa Scientific Instruments
It is important to observe the various precautions described below to ensure optimum system
performance and prevent accidents before they happen. Ensure safe and correct system operation
by carefully reading the precautions.
【
Precautions for Installation Location
】
Observe the following precautions in order to prevent fires and electrical shocks.
●
Do not install the system on an unstable or sloped foundation or any
other location subject unstable conditions.
●
If the system tips over or falls, immediately turn off power to the
system and all connected devices and disconnect the power supply
cables.
●
Avoid blocking the paths to any air vents included on the product.
Blocked air vents can lead to internal overheating that may result in
physical burns or fire.
●
Avoid installing the system in locations subject to dust or strong
vibrations.
●
Avoid installing in locations subject to direct sunlight and wide
temperature fluctuations as this may result in internal overheating and
may cause physical burns or fire.
●
Do not place objects on top of the system.
●
Do not install the system in locations other than research institutions or
related facilities.
【
Electrical Precautions
】
Observe the following precautions when using electrically powered scientific instruments in order to
prevent electric shocks and fires.
●
Avoid operating system with power sources that do not conform to
system power supply specifications.
●
Avoid sharply twisting, altering, marking or otherwise damaging the
power supply cable. Avoid applying stress to, heating or placing
objects on the power cable.
●
Always ground the system to prevent electric shocks due to leakage
current.
！
WARNING
！
CAUTION
！
WARNING
v1.03
3
