TP350 User’s Manual
<
Explanation of specific function (Advanced Edit)
>
Within the cycling configuration screens there are numerous options.
There are also options
for Gradient , Touchdown
and Long range features
to use the Advanced Edit.
Gradient :
allows both the left and right temperatures (range of
temperature values: 4
~
99
℃
) that is programmable 0
~
25
℃
across block width (12wells) may be set separately and the
predicted well temperatures can be shown by clicking the ‘View
Gradient Temp’ link.
Touch down: allows for the temperature of a given step within a cycling event
to be progressively increased or decreased from an initial value
to a final value over a defined number of steps.
Long Range: allows the hold time of a given step within a cycling event to be
progressively increased or decreased from an initial value to a
final value over a defined number of steps.
After the parameters for each step are configured the operator
is prompted to enter the number of times to repeat the cycle.
Limit the Ramp Rate to this Temperature
:
Default settings is checked on Use
Global Setting
that based on the Global rate limit heating cooling rate of
Configuration/Machine Settings. Default temperature rate is maximum rate
(2.5
℃
/sec). When you are checked on Use Custom Setting, you control the
temperature rate (0.1
~
2.5
℃
) from former step to this step.
v.2.01
19