TM9456 Dual-Radio Installation and Programming Guide Programming a Dual-Radio System
37
© Tait Limited
July 2016
3
Programming a Dual-Radio System
After you have downloaded the
NTIDs (Network IDs) and
assembled the system, you can
program or read individual
devices in the system. Each time
you attempt to communicate
with the radio system, the Select
Device(s) dialog appears (an
example is shown in
).
This section contains the
following information:
■
Connecting a Dual-Radio System to a PC
■
Programming a Dual-Radio System
■
Recommended Dual-Radio Settings
■
■
Calibrating a Dual-Radio System
■
Important
For required programming application and firmware ver-
sions for your radio system, see
.
Figure 3.1
Select Device(s) dialog
