Tait TM9456, Installation And Programming Manual

Page: 18 / 53

TM9456 Dual-Radio Installation and Programming Guide Installing a Dual-Radio System 18
© Tait Limited July 2016
2 Installing a Dual-Radio System
This section describes how to install all components in a dual-radio system,
including downloading NTIDs and removing link J4, installing the radio
bodies and control head, connecting the radio system to a power source,
and installing antennas and remote speakers.
2.1 Overview of Steps Required
Before you start, make sure you have all the necessary tools and
components. See
page 13 for more information.
1. Check that the all devices in the radio system have the same
firmware, and the radio bodies have the necessary software features.
See
“Checking the Firmware Versions and Software Features” on
page 19 .
2. Download Network IDs to all devices in the system. See
“Downloading Network IDs” on page 19 .
3. Remove link J4 from the radio body interface that will be connected
to the control head. See
“Removing Link J4” on page 21 .
4. Assemble the body interfaces. See “Assembling the Body Remote
Interfaces” on page 22 .
5. Mount the radio bodies. See “Mounting the Radio Bodies” on
page 23 .
6. Install the radio connecting cable. See “Installing the Radio
Connecting Cable” on page 24 .
7. Install the antennas. See “Installing the Antennas” on page 26 .
8. Connect the radios to a power source. See “Connecting the Power
Cables to a Power Source” on page 28 .
9. Connect remote speakers (see “Connecting Remote Speakers” on
page 31 ).
10. Install the control head or heads. See “Installing the Control Head
Solution” on page 31 .
11. Install the fuses and check the installation. See “Checking the
Installation” on page 36 .