Tait TM9456, Installation And Programming Manual

Page: 44 / 53

TM9456 Dual-Radio Installation and Programming Guide Quick Reference 44
© Tait Limited July 2016
4 Quick Reference
❏
All components are present and are the correct
versions of hardware and firmware. See pages 13 to 15 .
❏
The system configuration table is downloaded to the
control head and radio bodies. See “Downloading
Network IDs” on page 19 .
Record the NTIDs assigned
Head
(TMBCxx) Head
Body
(TMBBxx) VHF Radio
Body
(TMBBxx) UHF Radio
❏
Link J4 is removed from the radio body connected to
the control head. See “Removing Link J4” on
page 21 .
❏
The correct remote interfaces are installed on the radio
bodies and control head. See page 22 and page 31 .
❏
For each body remote interface, the earthing tag is
attached onto the radio chassis. See page 22 .
❏
Antennas are connected to both radio bodies. See page 26 .
❏
The cables are attached into the correct ports. See page 31 .
❏
All grommets are installed. See page 17 .
❏
There is a solid and secure power supply to both radio
bodies. See page 26 .
❏
The correct fuses are fitted to the power supply leads. See page 36 .
❏
The radio system is programmed so the user can access
dual-radio features. See “Programming a Dual-
Radio System” on page 38 .