TM9456 Dual-Radio Installation and Programming Guide
Installing a Dual-Radio System
35
© Tait Limited
July 2016
2.8.6
Installing a Hand-Held Control Head
contains an overview of the connection between the radio bodies
and a hand-held control head.
Notice
If a radio body does not have link J4 removed, or you cannot
identify the correct radio body to use, you will need to disassemble one
or both interfaces. See
“Removing the Body Interface” on page 22
more information.
1.
Attach the hand-held control head cord to the innermost port of the
radio body with link J4 removed.
The outermost port of this radio body connects to the other radio body.
2.
Install the cable grommet. See
.
3.
Install the control head mounting clip in the most convenient
location for the radio user.
Figure 2.8
Connecting radio bodies to hand-held control head
Body with link J4 removed
To radio
body with
link J4 fitted
Outermost
port
Innermost
port
Hand-held
control head
Hand-held control head curly cord
Note:
may include an extension such as the
T02-00009-0201
