35
3.3.2 Installation of the protective cover of
HCS-4368/50 series flush-mounting voting
unit
If not in use for a long time, just pull out the microphone
and hook up the magnetic protective cover:
Figure 3.12 Installation diagram of the protective cover
of HCS-4368/50 series flush-mounting voting unit
A vacuum cup is needed to dismount the protective cover.
Seize the protective cover with the vacuum cup and pull it
from the discussion unit.
Figure 3.13 Dismounting the protective cover of
HCS-4368/50 series flush-mounting voting unit
3.4 Connection between voting units
All voting units of Large-Scale Voting System are
daisy-chained easily and conveniently by dedicated
6P-DIN cables.
When connecting to another voting unit, just connect
the 6P-DIN standard female connector on the
0.6-meter cable of the unit to the 6P-DIN standard male
connector on the 1.5-meter cable of the next unit.
Figure 3.14 “Daisy-chain” connection between
HCS-4368/50 series voting units
