33
3.3 Installation
3.3.1 Flush-mounting installation of voting
unit
3.3.1.1 HCS-4368T/50 series voting unit
a. Cut a hole in the table according to the dimensions
in figure 3.3;
b. Put the voting unit into the hole and drill four Ø 2
mm holes with 10 mm depth at P1, P2, P3 and P4;
c. Screw at P1, P2, P3 and P4.
Figure 3.3 Fixing hole positioning diagram of
HCS-4368/50 series flush-mounting voting unit (unit: mm)
Figure 3.4 Dimension diagram of HCS-4368/50 series
flush-mounting voting unit (unit: mm)
3.3.1.2 HCS-4368SDTE /50 voting unit
a. Cut a hole in the table according to the dimensions
in figure 3.5;
b. Put the voting unit into the hole and drill four Ø 2
mm holes with 10 mm depth at P1, P2, P3 and P4;
c. Screw at P1, P2, P3 and P4.
Figure 3.5 Fixing hole positioning diagram of
HCS-4368SDTE /50 series flush-mounting voting unit
(unit: mm)
Figure 3.6 Dimension diagram of HCS-4368SDTE/50
series flush-mounting voting unit (unit: mm)
