28
2.4.6 Operation language setting
Select LCD display language from simplified Chinese,
Traditional Chinese and English. Other languages can
be added by the user through software operation (refer
to software operation instruction for details).
Select language:
a). Press the “
Õ
/
Ö
” button to select LCD display
language;
b). Press the “MENU” button to save and return to
upper level menu.
2.4.7 System parameter backup/restore
If USB feature is enabled, system parameters can be
backed up or restored through the front panel USB port.
Make sure that the USB disk is properly connected;
otherwise it will prompt “Please insert the USB disk.”
a). Press the “
Õ
/
Ö
” button to select “Backup” or
“Restore”;
If
“Backup”
is selected, system parameters can
be backed up;
If
“Restore”
is selected, system parameters can
be restored;
b). Press the “MENU” button to confirm and to go to
selected menu item;
c). Return to upper level menu after backup or
recovery.
2.4.8 Machine rename
Set alias for the HCS-4100M/50 with a maximum
length of 16 characters or less. It is convenient to
identify them on the operation of room combiner.
a). Press the “MENU” button to enter the name setting
interface, the cursor blinks under the first character;
b). Press the “
Õ
/
Ö
” button to move the cursor;
c). Press the “MENU” button to modify the character;
Press the “
Õ
” button to clear all the characters
after the cursor;
press the “
Ö
” button to select the new character;
d). Press the “MENU” button to save at each
character;
e). Press the “EXIT” button to return to the upper level
menu after setting finished.
2.4.9 About
CMU information includes: firmware version,
corporation information and series number, shown as
in the following figure - press any button to return to
upper level menu.
2.4.10 Volume control
Volume can be adjusted by volume knob on the CMU
front panel - LINE IN 1 VOL. adjust knob and MASTER
VOLUME adjust knob. Meanwhile, the corresponding
volume indicator will be displayed on the LCD, as
shown in the following figure:
