14
A) Starting initialization
Switch on and press the “STANDBY” button,
HCS-4100MC/50 CMU will start initialization:
B) Initial interface on LCD
When the initialization is finished, the initial interface
will be displayed on the LCD:
“Menu”
“Mic’s”
“Mode”
Select and press the corresponding button below the
item and go to the next operation:
Press the “Menu” button to return to the main
menu
；
Press the “
Ö
” button to select the maximal
number of microphones that can be turned on
at the same time: 1, 2, 3 or 4;
Press the “EXIT” button to select the
microphone mode “OPEN”, “OVERRIDE”,
“VOICE”, “APPLY” or “PTT”.
“Open”:
If the maximal number of active microphones,
previously fixed, has been reached, delegates
requesting to speak join a request-to-speak list
with a capacity of 6. The first unit joining the list will
become active when the first active unit gets off.
“Override”:
If the maximal number of active microphones has
been reached and if another discussion unit is
activated, the delegate unit switched on first will be
switched off first automatically (first in / first out); If
the maximal number of active microphones has
been reached (includes Chairman/VIP units),
when another discussion units is activated, the
delegate unit switched on first will be switched off
first automatically.
“Voice”:
The delegates’ microphone is activated when
spoken into. After 300 or 600 milliseconds or 1-15
seconds
(adjustable) without speaking, the
microphone switches off automatically.
“Apply”:
When the delegate presses his/her microphone
ON/OFF button to request to speak, the chairman
unit can approve or reject his/her request.
“PTT” (push-to-talk):
When the delegate presses and holds the
microphone ON/OFF button, the microphone will
be activated; when the ON/OFF button is released,
the microphone will be deactivated.
C) Access main menu
Pressing the “Menu” button under initial user interface
will go to the main menu, which includes eight menu
items:
“Network”
“Simultaneous Interpretation”
“System Status”
“Test”
“System Setting”
“Operation Language Setting”
“System Parameters Backup/Restore”
“Machine Rename”
“About”
The current chosen term (e.g. “Network”) is highlighted.
Press the “MENU” button to go to the
corresponding submenu;
Use the “
Õ
/
Ö
” button to switch from term to
term;
Use the “EXIT” button to exit current menu and
return to the upper level menu.
