15
2.4.1 Network
“Network” includes three submenus:
“IP Address”
“Subnet Mask”
“Gateway”
a). Setting up unique “IP Address” for the
transmitter:
1).
Select “IP address” and press the “Menu” button
to go to setup IP address interface:
2).
Use the “
Õ
/
Ö
” button to switch between the four
numbers;
3).
Use the “MENU” button to edit selected number;
4).
Use the “
Õ
/
Ö
” button to decrease/increase the
number. To change the number quickly (= auto
repeat) press and hold the “
Õ
/
Ö
” button for a
longer time
5).
Use the “EXIT” to return to high level menu.
b). Setup “Subnet Mask” and “Gateway”
Same chronological order as for “IP address” set up.
2.4.2 Simultaneous interpretation
The HCS-4100MC/50 fully digital congress system
main unit does not have the simultaneous
interpretation function. So the setup interface is
inaccessible.
2.4.3 System status
“System status” submenu includes:
“Unit status”
“Interpretation status”
“Unit status”
When entering this submenu, a table consisting of the
total number, active number, and request-to-speak
number of microphones is shown as in the following
figure.
“Interpretation status”
The HCS-4100MC/50 fully digital congress system
main unit does not have the simultaneous
interpretation function.
2.4.4 Test
(cannot work under “VOICE” and “PTT”
mode)
“Testing” submenu includes:
“Microphone”
“LCD”
“Button”
“Loudspeaker”
“LED”
Note:
)
When controlled by PC software, "Subnet
Mask" and "Gateway" should be setup
according to the PC configuration; otherwise
it may cause a connection problem.
)
In menu operation, except for "Network" and
"Timing speech", all other menu changes
should be saved via pressing the "MENU"
button, pressing the "EXIT" button will ignore
the changes.