34
3.3.1.3 HCS-48U6VOTTM voting unit
a. Cut a hole in the table according to the dimensions
in figure 3.7;
b. Fix the two iron plates by tapping screws;
c.
Put and lock the voting unit into the frame.
Figure 3.7 Fixing hole positioning diagram of
HCS-48U6DVOTTME flush-mounting voting unit (unit:
mm)
Figure 3.8 Installation of HCS-48U6DVOTTME
flush-mounting voting unit (unit: mm)
3.3.1.4 HCS-4368DME/FM /50 voting unit
a. Cut a hole in the table according to the dimensions
in figure 3.9;
b. Put the metal frame into the hole and drill two Ø 2
mm holes with 10 mm depth at P1 and P2, than
screw the frame;
c. Put the voting unit into the frame and fix it by four
screws.
Figure 3.9 Fixing hole positioning diagram of
HCS-4368DME/FM/50 series flush-mounting voting unit
(unit: mm)
Figure 3.10 Fixing frame of HCS-4368DME/FM/50
series flush-mounting voting unit (unit: mm)
Figure 3.11 Fixing HCS-4368DME/FM/50 series
flush-mounting voting unit (unit: mm)