Taiden HCS-4100MC/50, Installation And Operating Manual

Page: 29 / 60

21
a). Press the “
Õ / Ö ” button to set auto turn off time
(press and hold the “ Õ / Ö ” button will adjust
numeric value quickly); range: 300 ms, 600 ms, 1s -
15 s.
b). Press the “MENU” button to save and return to
upper level menu.
16. “Set Timing Speech”
Set timing speech, range: 1-240 minutes.
a). Press the “ Õ / Ö ” button to set timing speech on/off:
ƒ If “
Off
” is selected, press the “MENU” button to
confirm and return to upper level menu;
ƒ If “
On
” is selected, press the “MENU” button to
confirm and go to step b);
b). Press the “ Õ / Ö ” button to switch between “Speech
time” and “Prompt time”;
c). Press “MENU” to select “Speech time ...(minutes)”
or “Before ...(s) to prompt”
d). Press the “ Õ / Ö ” button to set time (press and hold
the “ Õ / Ö ” button will adjust numeric value quickly);
e). Press the “EXIT” button to save and return to upper
level menu.
17. “Time Display Setting”
Display or do not display time on the LCDs of the
contribution units.
a). Press the “ Õ / Ö ” button to select “Yes” or “No”;
b). Press the “MENU” button to save and return to
upper level menu.
18. “Time Setting”
Set system clock.
a). Press the “MENU” button to go to “Year”, “Month”,
“Day”, “Hour”, “Minute” in turn;
b). Press the “ Õ / Ö ” button to set time (press and hold
the “ Õ / Ö ” button will adjust numeric value quickly);
c). Press the “MENU” button to save and return to
upper level menu.
19. “Chair Object Setting”
Assigning the operator unit or a chairman/delegate unit
with a LCD as the conference host. When an
interpreter presses the “CALL” button on his/her
interpretation unit, he/she sets up intercom with the
assigned conference host.
a). Press the “ Õ / Ö ” button to chair object setting, and
to assign any chairman/delegate unit with a LCD as
the conference host;
b). According to the hint on the LCD of the
chairman/delegate unit, press “1” button on this unit,
to assign it as the conference host;
c). Press the “MENU” button to save and return to
upper level menu.
20. “Number”
Numbering for DCS Units and Interpreter units.
™
DCS Units
a). Enter “DCS Units”, the LCD on the CMU will display
“Press ‘1’ button of congress units one by one and
repower”.