Taiden HCS-4100MC/50, Installation And Operating Manual

Page: 34 / 60

26
upper level menu.
37. DDS Units Setting
Set work mode for HCS-xxxxDDS:
a). Press the “ Õ / Ö ” button to select “Turn Off” or “Turn
On”;

Single ID:
one HCS-xxxxDDS owns one ID and
dual predefined positions; two delegates may
share one unit;

Double ID:
one HCS-xxxxDDS owns double IDs
and each predefined position for each ID; two
delegates may share one unit;
b). Press the “MENU” button to save and return to the
upper level menu.
38. Retractable Mic. Setting
Control the array microphone of HCS-4851/50 series
retractable microphone.
a). Press the “ Õ / Ö ” button to select “Control” or “Sync
Number”;
ƒ If select “
Control
”, use the “MENU” button to go
to step b);
ƒ If select “
Sync Number
”, use the “MENU” button
to go to step c);
b). Press the “ Õ / Ö ” button to select “Retract” or
“Raise”;
c). Press the “ Õ / Ö ” button to set sync number from 1
to 6;
d). Press the “MENU” button to confirm the operation
and return to the upper level menu.
39. Alarm Setting
Enable the “ALARM” interface in the backside of
HCS-8300M series congress unit.
a). Press the “ Õ / Ö ” button to select “On” or “Off”;
ƒ If select “
On
”, when detect alarm signal, all
congress units will be switched off and congress
units with LCD screen will display “ALARM”;
ƒ
If select “
Off
”, there will be no response for
alarm signal from the “ALARM” interface in the
backside of HCS-8300M series congress unit;
b). Press the “MENU” button to confirm the operation
and return to the upper level menu.
Note:
)
Please restart the CMU to enable the DDS
units setting.