28
19. “Chair Object Setting”
Assigning the chairman/delegate unit (except
Paperless Multimedia Congress Terminal) with a LCD
as the congress host. When an interpreter presses the
“CALL” button on his/her interpreter unit, he/she sets
up intercom with the assigned congress host.
a). Press the “MENU” button to enter chair object
setting and to assign any chairman/delegate unit
with LCD as the congress host;
b). According to the hint on the LCD of the
chairman/delegate unit, press the “1” button on this
unit, to assign it as the congress host;
c). Press the “MENU” button to save and return to the
upper level menu.
20. “Number”
Numbering for DCSUnits and Interpreter units.
DCSUnits
a). Enter “DCSUnits”, the LCD on the CMU will display
“Press ‘1’ button of congress units one by one and
repower”.
At this instant, all contribution units with a LCD will
prompt the number on their LCD; contribution units
without LCD will activate the corresponding LED.
b). Press “1” button on all contribution units one by one
to number them;
c). When all contribution units are numbered, restart
the CMU to update the number.
Interpreter Units
a). Enter “Interp’”, all the interpreter units enter
numbering status, and the ‘B’ indicator light was
turned on, the LCD of the main unit is shown as
following:
b). Turn the primary knob to select a number (1-6), and
press the ‘B’ button to confirm;
c). Press the “EXIT” button to stop numbering and
return to up level menu.
21. “U-disk Function Setting”
Enable/disable USD_D interface (mini USB interface)
on the front panel of the CMU. If enabled, the CMU can
be connected to the PC via the USB_D interface to
backup/restore CMU information.
a). Press the “
Õ
/
Ö
” button to select “Yes” or “No”;
b). Press the “MENU” button to save and return to the
upper level menu.
Note:
)
To update the number the CMU must be
restarted after the numbering;
)
HCS-4100/50 system has an
auto-numbering function. “Number" function
is used to allocate an ID to each contribution
unit manually. This is used for some
applications which need to know the exact ID
of each contribution unit, for example
controlling the contribution units by the WiFi
touch panel of the central control system.
Summary of Contents for HCS-4100/50 Series
