Taiden HCS-4100/50 Series, Installation And Operating Manual, Page: 158 / 223

144
5. Channel selector (for HCS-4842N/50 only)
ƒ When the CMU is connected to interpreter unit(s),
simultaneous interpretation function will work and
the channel selector will be activated. To use the
channel selector, an earphone must be plugged in.
When the earphone is plugged, the backlight of the
channel select display lights up. The delegate can
select a suitable language to listen to by means of
the channel selector;
ƒ When the earphone is pulled out, the backlight of
the channel select display will extinguish and the
output will switch to floor audio channel.
6. Volume control (for HCS-4842N/50 only)
ƒ When the earphone is plugged, its volume can be
adjusted by the earphone volume control of the
unit.
7. VIP unit (for HCS-4841N/50 series only)
ƒ Any delegate unit can be assigned as a VIP unit by
the HCS-4100/50 application software. At most 32
VIP units can be assigned;
ƒ As long as the active microphone number does not
exceed 6 (including chairman/delegate/VIP), the
microphone of the VIP unit can be activated freely;
ƒ If the priority mode is configured as “All off”, all
active delegate microphones will be turned off
when the chairman presses his priority key, and all
active VIP microphones will be muted temporarily.
They will restore when the chairman releases his
priority key;
ƒ
If the active microphone number reached 6, the
microphone cannot be turned on unless one of the
active microphones is deactivated.