99
3.6.2 Connection
3.6.2.1 Connecting to the CMU or the EMU
The HCS-4338/50 series congress unit is equipped
with a 1.5-meter 6P-DIN cable with a standard male
connector. To connect to the HCS-4100/50 CMU or the
HCS-8300 EMU, just connect the male connector of
the first unit to the output of the main unit.
If there is a long distance between the congress unit
and the CMU (EMU), CBL6PS extension cable can be
used. One end is equipped with a 6P-DIN male
connector and the opposite end with a female
connector. Just connect the female connector of the
cable to the next congress unit, and connect the male
connector to the output of the main unit.
Figure 3.34 HCS-4338/50 series congress unit
connected to the CMU/EMU
Neither the replacement of congress units nor cable
faults between congress units will affect the other units
if “Closed Loop - Daisy Chain” connection topology is
selected. “Closed Loop - Daisy Chain” connection,
achieved by closing the loop of the daisy-chained units,
increases system reliability. To obtain “Closed Loop -
Daisy Chain” connection, just connect the last
congress unit back to the CMU or the EMU with a
CBL6PP extension cable (the cable features a 6P-DIN
male connector at each end). In HCS-4100/50 series
system, the congress main unit can realize a “Closed
Loop - Daisy Chain” connection, but only one –
extension units do not offer this feature.
Figure 3.35 “Closed Loop - Daisy Chain” connection
between the CMU and HCS-4338/50 series congress
units
3.6.2.2 Connection between congress units
All congress units of HCS-4100/50 system are
daisy-chained easily and conveniently by dedicated
6P-DIN cables.
When connecting to another congress unit, just
connect the 6P-DIN standard female connector on the
0.6-meter cable of the unit to the 6P-DIN standard male
connector on the1.5-meter cable of the next unit.
Figure 3.36 “Daisy-chain” connection between
HCS-4338/50 series congress units
Summary of Contents for HCS-4100/50 Series
