Taiden HCS-4100/50 Series, Installation And Operating Manual, Page: 154 / 223

140
Figure 3.70 “Closed Loop - Daisy Chain” connection
between the CMU and multi-function connectors
3.10.3.2 Connections between multi-function
connectors
All HCS-4340/50 multi-function connectors are
daisy-chained easily and conveniently by dedicated
6P-DIN cables.
When connecting to another congress unit, just
connect the 6P-DIN standard male connector on the
2.1-meter cable of the next multi-function connector to
the 6P-DIN standard female socket of this
multi-function connector.
Figure 3.71 “Daisy-chain” connection between
HCS-4340/50 series multi-function connectors
3.10.3.3 Multi-function connector connected to
the HCS-4841/42/43 series congress unit
The HCS-4841/42/43 series congress unit is equipped
with a standard RJ45 socket. When connecting to the
multi-function connector, just use Cat.5 cable with
standard RJ45 plugs to connect the RJ45 socket of the
congress unit into the corresponding RJ45 socket of
the multi-function connector (figure 3.71). For the
descriptions of the interface of the multi-function
connector please refer to section 3.9.1.2.
3.10.3.4 External earphone
An external earphone can be connected to the external
earphone jack at the top of the congress unit. Its
volume can be adjusted by the earphone volume
control button. The external earphone shall have Ø 3.5
mm plug, as the following figure:
Functions and indications:
1 Left stereo channel signal
2 Right stereo channel signal
3 Power ground/Shield