Taiden HCS-4100/50 Series, Installation And Operating Manual, Page: 187 / 223

173
5.1.3 Connection between the CMU/EMU and component contribution units
HCS-4841/42/43 series and HCS-4341B/50 series
component contribution units must be connected to the
multi-function connectors with a dedicated cable
。 Then
the multi-function connectors are daisy-chained, starting
at the CMU in order to be joined to the congress system.
All daisy-chained connection cables are dedicated 6-pin
cables (as shown in figure 5.4).
1. A HCS-4340CA/50 multi-function connector can be
connected to 1 chairman unit, 1 voting unit and 1
channel selector (see section 3.9.1.2)
；
2. A HCS-4340DA/50 multi-function connector can be
connected to 1 delegate unit, 1 voting unit and 1
channel selector (see section 3.9.1.2)
；
3. One HCS-4340HDA/50(P) multi-function connector
can be connected to one handheld delegate unit, one
voting unit and one channel selector.
HCS-4340HDA/50P can supply phantom power for
condenser microphone (for the descriptions of the
interface of the multi-function connector please refer to
section 3.9.1.2.);
4. A HCS-4340B/50 multi-function connector can be
connected to 4 channel selectors (see section 3.9.1.2);
5. One HCS-4340DT/50 multi-function connector can be
connected to two delegate discussion units and two
channel selectors (see section 3.9.1.2.).
Figure 5.4 Congress main unit connecting to 4841/42/43 series contribution units and HCS-4385U/50 interpreter units