Taiden HCS-4100/50 Series, Installation And Operating Manual, Page: 150 / 223

136
3.10.2 Installation
3.10.2.1 Installation of HCS-4841/42/43 series
congress unit
■ Stand-alone installation
a. Cut holes in the table according to the positioning
diagram (figure 3.60);
b. Put the congress unit with the cables into the hole.
Fix the unit with the black M3 Phillips screws (figure
3.61);
c. Stick PVC to it.
Figure 3.59 Dimension diagram of HCS-4841/42/43 series
congress unit (unit: mm)
Figure 3.60 Positioning diagram of HCS-4841/42/43 series
congress unit (unit: mm)
Figure 3.61 Installation diagram of HCS-4841/42/43
series congress unit (unit: mm)
■ Assembly installation
a. Cut holes in the table for the first unit according to
the positioning diagram (figure 3.62);
b. Make sure that the distance between the center of
the two adjacent holes is 111.4 mm (Figure 3.62),
and repeat step a to cut holes for the adjacent
unit(s);
c. Put the congress units into the holes, with the
cables, according to the mounting feasibilities
existing on site. Fix with black M3 Phillips screws;
d. Stick PVC to each unit.
Figure 3.62 Positioning and assembly installation diagram of several HCS-4841/42/43 series congress units (unit: mm)