Tadiran Telecom SLT User Manual Download Page 91

Page: 91 / 129

Paging

SLT User Guide

Voice (To Single Keyset)

Paging: Voice (To Single Keyset)

Hookflash 6, #191 or #3

You can voice page an idle or busy keyset (FlexSet, DKT, T207M or T208M).

To voice page (from idle):

1. Lift handset.

2. Dial Voice Page feature code

#191

followed by the keyset dial number.

or
Dial a Keyset Voice Page number.

3. Listen for the Voice Page tone.

4. Begin paging when tone stops.

5. Hang up.

Note:

Each Keyset has a unique Voice Page number, which is defined through the Coral system.

To voice page a single Keyset that is either busy or does not answer:

1. Hookflash during the call.

2. Dial Voice Page code

3. Listen for the Voice Page tone.

4. Begin paging when tone stops.

5. Hang up.

Summary of Contents for SLT


































































































































Search results

Summary of Contents for SLT

Reviews:

Related manuals for SLT

Brands by name

Popular brands

Tadiran Telecom SLT, User Manual

Search results

Summary of Contents for SLT

Reviews:

Related manuals for SLT

Brands by name

Popular brands