Making Calls
77
SLT User Guide
Making Calls
To make external or network calls:
1. Lift handset.
2. Dial external line code.
3. Dial external number.
#
Notes:
1) In some systems an outside dial tone must be heard before dialing can begin.
2) In some systems using Automatic Routing Selection, inside dial tone or no tone is heard after dialing the
external line code.
3) In some cases, as defined by Class of Service, dialing must begin with a Forced Account code before the
outside number can be dialed. When Forced Account code is required, the distinctive dial tone is heard after
dialing the external line code.
4) See also Caller ID control on
page 33
.
5) Pressing
[#]
after the external number commands the system to send the call immediately towards the
destination without inter-digit delay.
6) Some systems might be programmed with a limit on duration of outgoing external calls. Once the pre-defined
limit is reached, the call is automatically disconnected.
To make internal calls:
1. Lift handset.
2. Dial station number.
3. Listen for the ringback tone.
4. Wait for answer.
