Tadiran Telecom SLT User Manual Download Page 55

Page: 55 / 129

FlexiCall

SLT User Guide

FlexiCall

To operate FlexiCall:

1. Lift handset.

2. Dial the appropriate feature code (see Table 4 on page 49).

3. Listen for dial tone.

4. Dial the remote destination number (internal number or Public/Private Library number), at which calls ring

simultaneously with your Coral station.
A remote destination can be:

an operator, station, network number, UNA/Central Bell, or external number

(stationary or cellular) via Public/Private Speed Call Library

5. Listen for the confirmation tone.

6. Hang up.

To cancel FlexiCall:

1. Lift handset.

2. Dial the appropriate feature code (see Table 4 on page 49).

3. Listen for dial tone.

4. Dial cancellation code

5. Listen for the confirmation tone.

6. Hang up.

Notes:

Should you hear a reorder tone, FlexiCall is denied at your station (as defined by Class of Service).

Summary of Contents for SLT


































































































































Search results

Summary of Contents for SLT

Reviews:

Tadiran Telecom SLT, User Manual, Page: 55 / 129

Search results

Summary of Contents for SLT

Reviews: