Tadiran Telecom Coral IPx 500X, Installation Procedure And Hardware Reference Manual

Page: 285 / 400

Cage Description
6-45
Coral
IPx 800
X
Exp
ansio
n Cag
e Descri
pti
on
6
6.3
Coral IPx 800X Expansion Cage
Description
This section describes the main features of the Coral IPx 800X (expansion) cage. For a
general description of the Coral IPx 800 system, see
page 6-3, Cage Description and
Installation
. For information about configuring the system, see
page 6-53, System Configuration Options
.
The expansion cage expands the Coral IPx 500/800 and Coral IPx Office system
capacity by adding ports to the system. The expansion cage includes I/O card slots for
peripheral cards and a slot for the power supply unit. The rear panel of the cage
includes two expansion connectors that are used to connect the expansion cage to
other cages and one power supply duplication connector.
Up to two expansion cages may be installed in any IPx 500/800 system configuration.
For a list of components supplied with the IPx 800X cage, see
Table 2-6 on page 2-11
.
0
The expansion cage contains twelve card slots that are numbered 1 through 12 from
right to left. See
Figure 6-42
. Slot 1 is reserved for a shared service card or a PX buffer
card if two IPx 800X expansion cages are installed in the system. Slot 2 through slot 12
are universal I/O slots and may house any service or peripheral cards. Slots 4 and 5
may be configured to house primary or secondary clock synchronization digital trunk
cards. The slot on the extreme left labeled POWER SUPPLY is reserved for the power
supply unit.
Table 6-3
identifies the cards that are inserted into the card slots for the
Coral IPx 800X cage.
Table 6-3 Coral IPx 800X
Card Slot Configuration
for the Expansion Cage
1 Circuit Card Slots
Slot Contains Rear RJ-45
Connection Universal
I/O Slot
Slot 1 Service card for system with 1 IPx
800X cage. PX card for cage 1
(when two cages are installed).
No No
Slot 2-12 Any shared service or peripheral
cards
Yes Yes
POWER SUPPLY PS19 DC, DC-D, or AC unit No No