TAC VISTA Xenta OP, Handbook

Page: 13 / 46

TAC Xenta, TAC Xenta OP 2 Introduction
TAC AB, July 2007 13 (46)
04-00065-01-en
2 Introduction
2.1 TAC Xenta OP
TAC Xenta OP is a small operator panel designed to be used together
with TAC Xenta 100, 280, 300, 401 and 901 units.
The operator panel gives the user access to parameters and alarms with-
out communicating with a central system. Additionally, it is used to
monitor status, adjust setpoints and time channels. All values are dis-
played with an explanatory text in the alphanumeric display window.
2.2 This Manual
This handbook has the following contents:
Chapter 2
In this chapter the connection of the operator panel, TAC Xenta OP, to
the TAC Xenta 100/280/300/401 controllers is shown.
Chapter 3
The use of the OP together with TAC Xenta 100 and the principles for
handling display of Network Variables are explained in this chapter.
Chapter 4
The use of the OP together with TAC Xenta 300/401 controllers and the
most common menus are discussed here.
Chapter 5
This chapter contains technical data on the TAC Xenta OP.
Caution
• The TAC Xenta OP and the other products of the Xenta family
must not be used for any other purpose than that for which it was
designed.
• Installation and repair may only be performed by authorized per-
sonnel.