TAC VISTA Xenta OP, Handbook

Page: 39 / 46

TAC Xenta, TAC Xenta OP 5 Dialogs with TAC Xenta 280/300/401
TAC AB, July 2007 39 (46)
04-00065-01-en
As long as MODE: is 1 , the European standard changeover prevails
(one hour on the night before the last Sunday of March at 02:00 and
October at 03:00).
If MODE: is toggled to 2 the displayed (entered) values will govern the
changeover from/to the Daylight saving time.
MODE: equal to 0 means that there will be no change.
Press to move the cursor between the figures and use and
to change the values. When you are finished, press a last
time and leave the menu with .
If an AM/PM clock is used, the time is entered according to the instruc-
tions given in section 4.1
5.9 Log Off
If no changes have been made within 30 minutes, the operator will be
logged off and the access level returned to the default access level low.
Values that have been modified in the menu, but not “Entered”, will not
be saved at Log off.
+
–
Note
• During the first hour after the automatic changeover from day-
light saving time (MODE:1, 03:00 to 02:00) you must not set the
time manually. Should this happen, the clock will once again
move back to 02:00 when the time reaches 03:00.