TAC Xenta, TAC Xenta OP
5 Dialogs with TAC Xenta 280/300/401
TAC AB, July 2007
31 (46)
04-00065-01-en
5
Dialogs with TAC Xenta 280/300/
401
5.1
The Menus
The menus of the operator panel and the order in which they are pre-
sented are designed by an application programmer, using the
TAC Menta design tool.
Thus, the menus shown below are only examples. The principles show-
ing how to select among the menus and how to change the values are,
however, general.
Cyrillic characters
The TAC Xenta OP/RU model has the capability of displaying Cyrillic
characters.
The TAC Menta User’s manual describes how you switch the character
files of the OP.
24 hour clock vs. AM/PM clock
In those menus that allow time (clock) entries, like the Time Schedule,
the Holiday chart (Time channels) and the Daylight saving menus, you
may choose to present time with a 24 hour clock or with a 12 hour clock,
also called an AM/PM clock. The choice is made already during the
menu design phase in TAC Menta.
To translate between the two modes of display the following table can
be used.
24 hour clock
AM/PM clock
01.00
01.00 AM
06.00
06.00 AM
11.59
11.59 AM
12.00
12.00 PM
12.59
12.59 PM
13.00
01.00 PM
Summary of Contents for VISTA Xenta OP
