TAC VISTA Xenta OP, Handbook

Page: 36 / 46

5 Dialogs with TAC Xenta 280/300/401 TAC Xenta, TAC Xenta OP
36 (46) TAC AB, July 2007
04-00065-01-en
When finished, press after the last entry and then use to
return to the previous menu level.
Holiday chart
The week schedule can be modified by a Holiday chart which defines
conditions for certain dates, for example when Christmas Eve occurs on
a workday:
AH02: Holiday chart
1234567
14:00–17:00 MTWTF
**-12-24 : **-12-24
The asterisks (**) act as “wild card”, that is, the date will in this case be
valid each year.
Use and to change the time and date values. Use to
move the cursor between the fields. To obtain asterisks in the date
fields, toggle the month value past 12. To obtain asterisks for the year
value, you must toggle
backward from the value 94.
When finished, press after the last entry and then use to
return to the previous menu level.
The Holiday chart is valid throughout the 24 hours.
Note, for example, the following case:
Week schedule says active 08:00-18:00
Holiday chart says active 00:00-00:01
The object will be active for the one minute only.
Special cases
If you want the time channel to be turned off for the whole day and night
and use the 24 hour clock, you indicate this by
00:00-00:00
and with the AM/PM clock (please refer to section 4.1)
12A00-12A00
If, instead, you want the time channel to be turned on for the whole day
and night and use the 24 hour clock, you indicate this by
00:00-24:00
and with the AM/PM clock
12A00-00P00
+
–