TAC VISTA Xenta OP, Handbook

Page: 37 / 46

TAC Xenta, TAC Xenta OP 5 Dialogs with TAC Xenta 280/300/401
TAC AB, July 2007 37 (46)
04-00065-01-en
In the latter case the end time (24:00 respective 00P00) is a normally
’nonexistent’ time value.
5.5 Access Code
Every item that is displayed in a menu on the operator panel has an
access level, which can be low, medium or high. An item with low
access level will always be visible on the display of the operator panel.
To show items, with access level medium or high, a correct access code
has to be given. There is one code giving access to low and medium
level items and one to give access to all levels.
The default codes are
Medium level: 1111
High level: 2222
To change access level go to the following menu:
AH02: ACCESS CODE
CODE: 0000
Change code to
extend menu
Use to move the cursor between the digits and use and
to change their value. When finished, leave the menu with .
If the correct code has been entered, some more items will now be vis-
ible in the list, for example, “Edit Access code”.
5.6 Edit Access Code
To change the code that gives the operator access to the medium or high
level items, the access level code for the level to be changed must first
be entered as described above. Then go to the Edit Access Code screen:
A2: EDIT ACCESS CODE
EDIT CODE: 0000
Change code for
the active level (no.)
Use to move the cursor between the digits and use and
to change their value. When finished, press and leave the
+
–
+
–