TA Instruments TMA 2940 CE, Operator'S Manual

Page: 96 / 178

Using Your Options
TA I
NSTRUMENTS
TMA 2940 CE 4–8
Installing the
Film/Fiber Stage
1. Lower the film/fiber stage down carefully
over the probe onto the base.
2. Place the wave washer over the top of the
stage and probe assembly, and lower it onto
the flange.
3. Slide the stage retainer ring carefully over
the top of the stage and probe assembly so
that it rests on top of the wave washer. Push
down and turn clockwise to tighten the
retainer ring.
4. Carefully align the stage slot with the slot in
the top of the probe, and position the stage
opening to the front. (See Figure 4.1.)
Figure 4.1
Film/Fiber Stage
and Probe Assembly
5. Replace the large stage nut, and turn it
clockwise to insert it.