TA Instruments TMA 2940 CE, Operator'S Manual, Page: 48 / 178

Installation
TA I
NSTRUMENTS
TMA 2940 CE 2–12
Installing the
Weight Tray Door
Locate the plastic weight tray door in the box
with the accessory kit, wrapped in a sheet of
shipping material. Remove the shipping material,
and follow these steps to install the door:
1. Locate the mounting holes on the top and
bottom of the door.
2. Hold the door with these mounting holes to
the left.
3. Put the lower hole over the small bottom
post to the left of the weight tray.
4. Push down gently on the door as you guide
the upper hole over the cone-shaped post at
the top of the entrance.
5. Release the door and close it.
6. Install the stage as directed in the next
section.