Running Experiments
TA I
NSTRUMENTS
TMA 2940 CE
3–16
Setting Up an
Experiment
Once you have prepared the sample, the next
step in your experiment is to enter the needed
information in the TA controller. All of the
controller functions described in this section are
accessed through the instrument control func-
tions. Refer to the software online documenta-
tion to learn how to perform the following steps:
1.
Select the Instrument.
2.
Select the Instrument Mode.
3.
Enter Sample Information.
4.
Enter Instrument Information.
5.
Create or select the thermal experi-
ment.
The first time you use your TMA 2940 CE, you
will need to create at least one thermal
method
(or test) to control experiments. Each method
(test) is made of several
segments
, or individual
instructions (
e.g.
, Equilibrate, Ramp), that control
the state of the instrument.
Summary of Contents for TMA 2940 CE
