![background image](http://html1.mh-extra.com/html/t-drill/f-400/f-400_instruction-manual_3075621022.webp)
INSTRUCTION MANUAL
22
#
Denomination
Description of the function
11
Cycle start push-button
Starts the automatic cycle. Cycle starts only when the
moving carriage is in start position. Push button also
starts main burner gas flow during hot forming heating
cycle.
Cycle start lamp is on also when machine is driven to
flame adjustment position.
12
Cycle interrupt push button
Abortion of automatic work cycle
Cycle stops and the carriage returns to back position
and heating arm goes to side position.
13
Control switch of pipe clamp Closes or opens the pipe clamp.
14
Control switch of carriage
Moves the carriage forward or back.
15 Control switch of the tool
Turns the tool.
16
Rotation of the drum.
Pipe clamps cannot be opened if the drum is not in
correct position. When the automatic cycle stops the
drum is normally positioned automatically into correct
position. If not, the drum is positioned by pressing
button nr 9.
17
Emergency switch (red
STOP button)
Stops the machine in case of danger
18
Key-switch
To connect control of spindle motor brake release push
button (see detailed information below)
19
Brake release push button
When emergency switch is pushed and the key switch
(19) is in position 2, with pressing this push-button the
spindle motor brake is released and the slide can be
turned manually.
20
-
-
21
Reset button of the area
scanner
Resets the area scanner
22
Signal lamp of the area
scanner (OPTION)
Lamp will light when lens of the scanner is dirty