FLANGING MACHINE
63
F-400
8.3 PLC-BATTERY MAINTENANCE
Nominal voltage of the battery is 3V (battery type: FX3U-32BL). Battery of the
PLC should be changed after 4-5 years of use.
1. Turn of the power.
2. Remove the battery cover:
Slightly lift the “B” side of the battery cover (“A”). Grasp the cover (“A”) between your
fingers and remove it.
3. Remove the old battery
Extract the old battery from the battery holder (“C”), and disconnect the battery
connector (“D”).
4. Install the new battery
Connect the battery connector (“D”) to the new battery, and insert the battery into the
battery holder (“C”).
¨
NOTE! The connector of the new battery should be attached within 20
seconds after removing the connector of the old battery.
5. Refit top cover.
