INSTRUCTION MANUAL
56
¨
NOTE! Do not enter the rotating area of the slide. The slide may rotate
due to eccentric mass.
10. Lift the slide upwards by rotating the adjustment screw counter clockwise.
Simultaneously keep the crane lifting so that the lifting chain does not get loose.
However, do not try to lift slide with crane until adjustment screw gets loose. When the
screw is loose, lift slide carefully upwards until you can move it aside. (Picture)
11. Installing of flanging slide in reverse order:
¨
NOTE! When the slide is installed release “Brake release” push button
and turn key switch to ‘1’ position.
12. Install hoses to the slide and tighten securely with a wrench.
During tightening, operator must see to it that the quick connectors male part does not
get loose. Keep it steady with another wrench.
13. Remove the lifting eyelet.
