Systemline S6.2, Installation Manual

Page: 8 / 24

PAGE
8
Section 2
•
Connecting the System
2.2 Mains Voltage Selection
and Fuses
The S6.2 is shipped with the Voltage selector
on the rear panel set to 240V and a 630mA
fuse .
If the local mains supply is 110/120V ac,
• Change the Voltage selector switch
setting to 120V
• Fit a 1.25mA fuse
• Obtain and fit a suitable 2 pin or 3 pin IEC
mains cable/power cord
2.3 Wiring Layout
See Figure 2. Routing AV sources has not
been shown for clarity.
2.4 Installation Records
When the installation has been designed
and completed, record the details of
the installation in the boxes provided on
the back page of the User Guide for the
information of the Users.
2.5 Wiring the Components
Touchscreen Wiring
RJ45